[Tfug] Shameless Parts Trafficking (big list)

Bexley Hall bexley401 at yahoo.com
Mon Dec 31 10:12:48 MST 2007


> > By contrast, a 611 case is a little narrower,
> > is most definitely *rectangular*, and has a pair
> > of 68 pin connectors side-by-side on the rear.
> >
> > > Sun 50-pin SCSI external storage disk enclosure
> > > Contains 4 SCSI Seagate Barracuda disks of
> unknown
> > > capacity (probably 2.1 GB each)
> > > Would make a good external RAID. $25 or best
> offer
> >
> > This is probably an 811 case.  Same shape as the
> > 411 (more or less) but twice as tall.
> 
> No, the same cables work on this device as well.

Sorry, apparently a misunderstanding... the
*connectors* on this box will be the same as
on the 411 case.  However, the *case* itself is
the "same shape as the 411 but twice as tall"

> > > 1 Sun SBus ZX Leo framebuffer card
> > > (24-bit, 3D acceleration, unopened)
> > > $5, or free with the SparcStation 20 (whichever
> is
> > > sold first)
> >
> > If you don't find a buyer, please consider sending
> it
> > to one of the SPARC developers on any of the free
> > eunices.
> 
> Yeah, this one was hard to find to begin with :)

What's *harder* to find is the extra VSIMM for it!
 
> > > 1 GB RAM
> > > 3 SBus ports (all occupied)
> > > 1 SBus SunGX framebuffer card (8-bit, 13W3 port)
> > > 1 SBus 100 MBit Ethernet card (with MII port)
> >
> > Which card is this?  I may be looking for a 100M
> card
> > if I resurrect my LX...
> 
> It's the Sun "Happy Meal" 10/100 MBit Ethernet SBus
> card.

Hmmmm... I thought the HME was supposed to have an
RJ45?

> > > 1 SCSI port (I don't know the type)
> >
> > I think the U1 still was 50 pin *narrow*.
> >
> > > Integrated audio
> > > 1 15-pin serial port
> >
> > Hmmm... that doesn't sound right.  Perhaps you are
> > refering to an MII or parallel port?  (does the
> icon
> > look like two PARALLEL -- though slanted --
> lines?)
> > Sun has all sorts of oddball adapter cables to get
> > from the back of "whatever" machine to "something
> > more traditional"...
> 
> It has the two slanted parallel lines.

Parallel lines == parallel port!  :>
 
> > > 1 SCSI CD drive
> > > 1 Sun Keyboard/Mouse port
> > > NO HARD DRIVES (accepts up to 2 SCSI disks [this
> one
> > > had a Seagate Cheetah disk])
> >
> > I think the U1 can accept one 1/3 height and one
> 1/2
> > height?
> 
> Possibly--it looks like it could fit three drives,
> but there are only two SCSI ports.

If you look carefully, you will see that there is
much less room "above" the topmost connector than
the bottom one.  The bottom one will accept a 1.6"
tall drive while the top will only accept a 1"

[SS20]

>> I ran NetBSD 2.0.2 for some time on a quad 70MHz(?)
>> SS20 and was quite happy (though the case gets hot
>> enough to toast bread!)
>
>The previous owner warned me about that... :)

With just two relatively slow CPUs, its not too bad.
But, with four "fast" (ha!) ones, the SS20's piss
poor cooling takes its toll.  Especially if you have
two disks in it and/or are beating on the CPUs...

[LCIII's]

>> They'll take SE SCSI narrow drives -- like the
>> SS20.
>
> Really?  That's very interesting...had I known that
> before putting
> them up for sale, I'd have swapped in the SS20's
> drive into one of the LCIII's.

Grrrr... My bad.  Sorry, I should learn to take
more time writing/reviewing my posts before I
hit "SEND".  (I try very hard to keep my "on-line
time" to an absolute minimum!)

<:-(

The SS20 drive will NOT fit in a Mac.  It is an
SCA drive.  The Mac will need a SE 50-pin drive.
And, IIRC, a 1/3rd height, maximum (LCIII is a
very "short" enclosure, right?).

Sun boxen have damn little in common with each
other -- besides the Sun logo!  :<

E.g., the SS1+, SS2, SS10 (which all look like
an SS20, more or less) take SE 50 pin drives.
(I was thinking of the SS10 when I wrote that
original statement).  Yet, the SS4, SS5, SS20
(which *also* resemble the SS20) take SCA 
drives.  (hmmm... I may have the SS4 in the
wrong group, there... :< )

While the first group can accept half height
drives, the second group can only accept 1/3
height drives (though there is a hack you can
use to cram a single half height drive into
one of these machines -- with some minor surgery).

Memory is also not very interchangeable (though
there is *some* overlap).

The U1 can accept a half height SCA drive (in the
bottom slot) and a third height drive in the top
slot.  (N.B. the U1 also has other names -- Netra,
etc.)  OTOH, the U2 takes a pair of third height 
drives side by side.

U5 and U10 take IDE drives -- the U5 only one while
the U10 will handle 2 (you can also configure the
U10 to automatically do mirroring between the
drives!).

U30 and U60 will take two half height SCA drives.
I think the U80 is likewise -- but the 420R (which
is a rack mounted U80) will only handle third
height drives (?).

The 411 (and 811) cases accept SE 50 pin drives
while the 611 accepts SCA drives (but the 611T
accepts SE 50's -- even though it has a wide SCSI
connector on the back panel!)

CPUs are just as non-interchangeable as well.   :<

And, if you want to *connect* anything to a Sun
box, the range of different cables and cabling
*schemes* is mind boggling!  (e.g., the IPC
uses a circular mini-DIN for each serial port;
other machines use a DB-25; some machines put
*two* serial ports on a single DB25; etc.)

Sun hardware is outright *wacky*!  Birdsall's
FAQ is a *must* have if you intend to play with
Sun boxen (I believe it is being updated -- it
is quite old, now).

[Note I haven't even addressed the *newer* Sun
boxen -- nor the old Sun3 hardware, etc.  :> ]

Sorry for the confusion.  :<  I'll look to see 
if I have any spare SE narrow drives lying around.
I *know* I have a third height drive with A/UX
on it -- but I would be really hesitant to lose
that :<   Pity as I just recycled a 2G half height
two weeks ago...  I'm pretty sure that my Beige G3
(next machine to be recycled, here) uses an IDE
drive (?) so that isn't a very good source...

Note that you also need to make sure whatever
"sled" is present for the Mac -- since mounting
a drive without one can be a PITA.  I can't
recall how the LCIII drive is mounted -- nor
can I recall what "accessories" it accepts
(cache cards, accelerators, etc.  I'll try to 
spend some time googling and see what I have
stashed away in my "old Mac" box...

--don


      ____________________________________________________________________________________
Looking for last minute shopping deals?  
Find them fast with Yahoo! Search.  http://tools.search.yahoo.com/newsearch/category.php?category=shopping




More information about the tfug mailing list